Zone Setup: Adding a Stop Line Presence Zone

This type of zone is defined at the stop line of the junction and detects the presence of vehicles and bicycles as the enter the zone. One or more zones can be defined for an intersection; the number is dependent on the requirements of the site. After laying out the physical zones, conditions, and actions can be defined for each zone.

NOTE:

Including overlapping zones in a configuration is not recommended as this can cause poor detection performance.
Adding or editing a zone while playing video may cause these operations to appear delayed or jerky.
A single zone covering multiple lanes is not recommended for Data Collection, as counts may not be accurate for shared zones. Also, single zones for multiple lanes is not recommended when using Pulse or Snappy outputs.

Zones can be added by either importing the calibration layout or manually.

Version 4.5.0 - Copyright © 2025, Image Sensing Systems, Inc.  All rights reserved.

Configuring IntelliSight Devices: Zone Setup

Adding a Stop Line Presence Zone