Configuring IntelliSight Devices: Zones Explorer

Assigning Vehicle or Bicycle Presence Condition

To use the Zone Explorer to assign Vehicle and/or Bicycle Presence conditions and actions not already assigned in the Easy Setup section, do the following.
  • Click the Zones Explorer heading to expand the section.
  • To the right of the zone description, click the plus sign (+) and select the presence conditions (Vehicle or Bicycle) to be added.
A Set Output action is automatically added to the presence condition. NOTE: If adding a Bicycle Presence condition, a bicycle icon appears in the lane.
3. To add actions (Set Output, and/or Display Zone or Bicycle color), select the condition, click the plus sign (+) then select the action to be added. Select from the following options:
  • Set Output - Adds another output action to the condition in both the Zone Explorer and Actions Explorer. Select the output from the drop-down. NOTE: Assigning the same output to more than one condition produces, by default, a logical OR operation in the Action Explorer.
  • Display Zone - (Only appears for vehicle presence) Adds a display action if one does not exist for the condition. This action is used to define what color the zone is to be outlined in on the video when the presence conditions is detected. NOTE: It is recommended that red not be used, as this is the color used by the system to indicate when the camera is in failsafe.
  • Bicycle Color - (Only appears for bicycle presence) Adds a bicycle color action if one does not exist for the condition. This action is used to define what color the bicycle icon is to be outlined in on the video when the presence condition is detected.
  • Shareable Actions - Adds an output action that is already used by another condition. Select the output to be shared.
4. To change the zone description, condition or action, highlight it and type a new description. For additional information about changing descriptions, see Chaning Zone, Condition, and Action Descriptions. 5. Do you want to delay the activation of a Vehicle Presence condition?
Yes
No
Continue with the next step.
Proceed to Step 9.
One use of this function is for right turn zones that share an output with a through zone. For example, a right turn lane could have a delay in case a car that is making a right turn can turn right away and does not need to wait for a green light. If there is not a car waiting in the through lane, and the right-turning vehicle clears the zone before the delay, there is no call to the controller.
6. Click the drop-down indicator to the left of Vehicle Presence. 7. Select or enter the number of seconds to delay. 8. To collapse the options box, click the arrow to the left of Vehicle Presence. 9. When all conditions and actions have been defined, click Apply Changes.
All assigned outputs are set to "call" (ON), and stay in "call" until detection sets the output OFF or for a maximum of five minutes, whichever occurs first. To change the initial state of the output or the set the output options, use the Zones Explorer.
NOTE: After all zones are defined and configured, it is recommended that the configuration be archived (see Saving an Archive File).
Version 4.5.0 - Copyright © 2025, Image Sensing Systems, Inc. All rights reserved.