Configuring IntelliSight Devices: Zones Explorer
Assigning a Snappy Condition
The Snappy condition is used to set an output that will be sent to the controller when vehicles are present in the zone during the red phase and then again when each vehicle exits the zone.
NOTE: A single zone covering multiple lanes is not recommended when using Snappy outputs.
- In the Zone Explorer section, click the plus sign (+) to the right of the zone description and select Snappy.
A Set Output action is automatically added to the Snappy condition.
2. Click the drop-down indicator to the left of Snappy.
3. Use the drop-down menu to select the Phase this condition is associated with.
4. Use the drop-down menu to select an output to be sent to the controller when the Snappy condition is met.
To change the initial state of the output or to set the output options, use the Action Explorer.
6. When all conditions and actions have been defined, click APPLY CHANGES.
Version 4.5.0 - Copyright © 2025, Image Sensing Systems, Inc. All rights reserved.