Configuring IntelliSight Devices: Zones Explorer
Assigning a Phase Color Condition
The Phase Color condition is used to set an output according to the state of the color condition particular phase. The Phase Color condition would normally be used in conjunction with a Presence condition having the same output. A typical scenario would be a left turn lane with two zones in order to detect more than two vehicles in the lane. In the Actions Explorer section, the presence outputs from the two zone could be added with the output from the Phase Color condition for left turn signal operation.
- In the Zone Explorer section, click the plus sign (+) to the right of the zone description and select Phase Color.
A Set Output action is automatically added to the Phase Color condition.
2. Click the drop-down indicator to the left of the Phase Color.
3. Use the drop-down menu to select the Phase this condition is associated with.
4. For State, click the drop-down menu to select the state associated with the phase.
5. Use the drop-down menu to select an output to be sent to the controller when the Phase Color condition is met.
To change the initial state of the output or to set the output options, use the Action Explorer.
6. When all conditions and actions have been defined, click APPLY CHANGES.
Version 4.5.0 - Copyright © 2025, Image Sensing Systems, Inc. All rights reserved.