Configuring IntelliSight Devices

Changing Zone, Condition, and Action Descriptions

The descriptions of all zones, conditions, and actions can be changed by the user. To change any description, highlight it and type a new description. Any number of alphanumeric and special characters can be used; however the displayed string is limited to the size of the Supervisor screen. The results of description changes are dependent on the order in which changes are made.

Zone Descriptions

Zone descriptions can be changed in either the Easy Setup, Zones Explorer or Actions Explorer sections. Changes made in one section automatically appear in the other sections. In addition, the zone description change also appears in the default condition description if the condition description has not been changed. The default descriptions are dependent on how the zone is created. If the zone is created by selecting Add Zone, the default description is "Zone." If the zone is created by selecting Zones from Calibration, the defaults are as follows.
Selection
Default Descriptions
No Turn Lanes
Through Lanes
Left Turn Lane
Through Lanes and Left Turn Lane
Right Turn Lane
Right Turn Lane and Through Lanes
Left and Right Turn Lanes
Right Turn Lane, Through Lanes, and Left Turn Lane
Preserve All Lanes
Zone 1, Zone 2, and Zone 3

Condition Descriptions

Condition descriptions can be changed in the Zones Explorer and Actions Explorer sections. Changes made in one section automatically appear in the other section. The default descriptions for the two conditions are: Vehicle Precence in xxx Bicycle Presence in xxx The xxx is the description of the zone to which the condition is associated. When using the default contidion descriptions, if the zone description is changed the condition description is automatically updated to reflect the change. However, if the condition description is changed first and then the zone description second, the condition description will not be updated with the new zone description.

Action Descriptions

The two default action descriptions are Display Zone and Set Output. The Display Zone description can only be changed in the Zones Explorer. The Set Output action description can be changed in the Zones Explorer and Actions Explorer sections. Changes made in one section automatically appear in the other section.
Version 4.3.1 - Copyright © 2024, Image Sensing Systems, Inc. All rights reserved.