This function is used to adjust the vehicle length detected by the Echo sensor if required.
NOTE: Vehicle speed must be calibrated before vehicle length.
- Click the Calibrate tab.
- Click Length calibration.
- Select the check box to the left of each zone for which lengths are to be checked.
- Click Start.
- If the value in the Measured length column is not correct, enter the difference in the Adjustment column. All detected lengths for the zone will be adjusted by the amount specified after you click Save. The value specified can be between +/- 10 and can have one decimal place (e.g., 3.2, 1.4, etc.).
- To save the values, click Save.
Version 2.0 - Copyright © 2022, Image Sensing Systems, Inc. All rights reserved.