Installation and Setup: RTMS Echo Sensor

Aiming the Sensor

Aiming the Echo sensor is a combination of physically moving the sensor while viewing the values for Roll and Tilt on the Aim page in the Echo web app.

• Log in to the sensor (see Logging In/Out).
• Select the Aim tab.
• Move the left/right side of the sensor up or down to adjust the roll according to the slant of the road. For a level road, the roll should be set to -0.

4. Tilt the sensor forward or back to adjust the tilt to match the specifications in Mounting Height and Tilt Settings.

5. Swivel the sensor left or right to adjust the azimuth until it shows OK.

6. Tighten the nuts securing the sensor to the mounting bracket. 7. Detect zones.

Version 2.0 - Copyright © 2022, Image Sensing Systems, Inc. All rights reserved.