Web App Operation

Settings: Wi-Fi

This function is used to enable or disable the Wi-Fi feature and/or change the password to allow Wi-Fi access. The wireless network for the Echo sensor is echo-xxxx (where xxxx is the Echo device serial number) and the default password is echo123456. The default Wi-Fi IP is 10.99.50.1

• Click the Settings tab.
• In the Wi-Fi section, click Change.

3. Use the drop-down to select whether Wi-Fi is enabled or disabled. Wi-Fi can be enabled permanently, for just 15 minutes or for just one hour.

4. To change the password used to access the Wi-Fi, click in the field, enter then re-enter the new password. A minimum of 8 and a maximum of 63 characters can be entered. 5. If a change was made, click Save changes.

Version 2.0 - Copyright © 2022, Image Sensing Systems, Inc. All rights reserved.