Supervisor Operations
Restoring an Archive File
The Restore Archive command is executed from the Device screen, and is used to download the contents of a previously saved archive file into the selected device.
If the model of the archive does not match the model of the device, then a message will be displayed indicating that the archive cannot be restored. The settings that get restored are as follows:
If the model of the archive does not match the model of the device, then a message will be displayed indicating that the archive cannot be restored. The settings that get restored are as follows:
Settings | IntelliSight Camera | IntelliSight Processor |
Detection configuration | X | |
Camera calibration | X | |
Zone setup, including output assignments and any defined overlays | X | |
Device Settings
User descriptions
Contrast loss |
X
X |
X |
To restore an archive file, do the following:
- On the Home screen, click the icon for the device for which the archive file is to be restored.
- On the Device screen, click Restore Archive.
- When the Open window appears, locate and select the archive file (xxx.arch) to be restored.
- Click Open.
The archive settings are downloaded into the device.
Version 4.1 - Copyright © 2022, Image Sensing Systems, Inc. All rights reserved.