Configuring IntelliSight Devices: Camera Setup

Zones Explorer: Assigning a Pedestrian Presence Rule

The Pedestrian Presence Rule is used to detect when a pedestrian is present in the crosswalk.

• In the Zone Explorer section, click the plus sign to the right of the zone description and select Pedestrian Presence Rule.
• To define what color the display zone is to be outlined on the video, click a color block and select a color. Click elsewhere on the screen to close the color selection pop-up.

The first block defines the display color when a pedestrian is detected (present in the zone) and the second block defines the color when the zone is empty (no detection).

• It is recommended that red not be used, as this is a color used by the system to indicate when the sensor is in failsafe.

3. Select or enter the number of seconds to delay. The value can be between 0 and 120 seconds. Default is 0.

4. In the Set Output field, select the output that will be sent to the controller when detection takes place. 5. When all conditions and actions have been defined, click Apply Changes.

Version 4.1 - Copyright © 2022, Image Sensing Systems, Inc. All rights reserved.