Configuring IntelliSight Devices: Config Management
Config Management
This operation is initiated from the Device screen. It is used to create and save multiple zone configurations that can be activated at different times of the day. The following are some examples of how this could be used.
- A third car trip is used in the morning (AM) but not in the evening (PM).
- There are multipurpose lanes that would have zones in them in the evening (PM) but not the morning (AM) becuase traffic would be moving in the other direction.
- Different configurations are need in the morning (AM), evening (PM), and during rush hour traffic.
1. Create a zone configuration.
2. On the Device screen, click Config Management.
3. In the Named Configs section, select and change the name for the first configuration from the default name of "Primary" to something else (e.g., Daytime config, Nighttime config, etc.).
4. Click the copy icon to the right to create a copy.
5. Highlight the copy and change the name for the second configuration.
6. Report steps 4 and 5 for other configurations.
7. In the Schedule section, click the plus sign to the right to add a schedule.
8. Choose an option from the drop-down menu: Daily, Weekday, or Day of the Week.
9. For each schedule created, select the configuration to which the schedule is associated.
10. Select the starting time when the configuration is to be active.
The timer (green box) indicates when the next expected config change will occur based off the schedule.
11. After all configurations and schedules have been created, return to the Device screen.
The currently active configuration is shown and scheduling is disabled.
12. To set up zones for a configuration, select the config in the Active Config field then click Zone Setup on the bottom of the screen.
13. On the Zone Setup screen, configure zones as desired.
14. When complete, return to the Device screen.
15. Repeat steps 12-14 for each defined configuration.
16. To activate the configuration schedules, click the icon to the left of Active Config.
The name of the currently active configuration and an indication that scheduling is enabled is displayed. In addition, at the bottom of the screen Zone Setup will be grayed out and a lock icon will appear next to it. Zones setups cannot be edited while scheduling is enabled.
- If you try to enable a configuration that has a schedule different from the current configuration a pop-up warning appears. Selecting Yes changes the Active Config; selecting No keeps the current Active Config.
Version 4.3.1 - Copyright © 2024, Image Sensing Systems, Inc. All rights reserved.