This section provides information on how to adjust the aim of the camera lens.

Use the Security Torx T-10 bit to loosen the two screws on the sunshield.

2.  Remove the sunshield and set aside.

The clear polycarbonate anti-tampering lens will be exposed.

3.  Loosen the three screws on the polycarbonate sheild.

4.  Once it is loose, remove the clear polycarbonate shield.

The camera lens will be exposed.

5.  To optimize the view of the traffic lens, adjust the tilt and/or roll of the lens as necessary.

Version 2.0 - Copyright © 2022, Image Sensing Systems, Inc.  All rights reserved.